Hot search: Launch M-Diag V2.23 KTAG GM Tech2 KESS V2 xprog v5.7
US$0.00 Checkout
  • No item on cart , shop now !
Your Position: Home > Auto key Programmer > VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor

View History

VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor

VVDI2 BMW FEM & BDC Functions Authorization Service With Ikeycutter Condor

  • NO.:SV86-S
  • Quantity: 100
  • History: 159 sold
  • Brand:Xhorse
  • Weight:300.0G
  • Shop price:US$599.00
  • Total:
  • Quantity:
  • Limit points for buying:500 integral
  • shipping: click here to see shipping fee

Goods Brief

Tech Support

Review (0)


 BMW FEM/BDC Key Programming Function Authorization on Xhorse VVDI2 Commander(With iKeycutter CONDOR XC-MINI)

With this Authorization you can use your VVDI2 Commander to program BMW FEM/BDC Keys

No need shipping,please kindly read below:

1.You need to have iKeycutter CONDOR XC-MINI at hand

2.Send us the serial number of your VVDI2 Commander as well as the serial nubmer of your iKeycutter CONDOR XC-MINI and we will open BMW FEM/BDC Key Programming Function Authorization online for you

BMW FEM/BDC Key Programming Function Display:

BMW FEM/BDC Key Programming Function Display
BMW FEM/BDC Key Programming Function Display

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys) make new key with ignition switch(support add spare key and all key lost, all key lost require ISN) reset FEM/BDC KM(cluster require reset manually) erase key(after erase the key position become blank position) backup coding restore coding

1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.

User Comment(Total0User Comment Num)

  • No comment
Total 0 records, divided into1 pages. First Prev Next Last

Contact Information:

    Whatsapp: +86-18689221735
    Live Support: Chat with us online
    If you have any problem, please do not hesitate to contact us.

Goods Tag

LiveZilla Live Chat Software